Secret Codes
Functions/Description
§ *#06#
To check IMEI of your device, enter this code.
§ *#0*#
To enter service menu on the very new Android phones.
§ *#0228#
To check battery status.
§ *#9090# / *#1111#
To make device in Service mode.
§ *#*#4636#*#*
To get information about
battery, usage statistics and device.
§ *#34971539#
To get all information about camera.
§ *#12580*369#
To get software and
hardware info.
§ *#228#
For ADC Reading.
§ #7353#
To hide test menu 2/Self Test Mode.
§ ##7764726
To
hide service menu for Motorola Droid.
§ *#*#273283*255*663282*#*#* For backup
of our all media files.
§ *#*#232338#*#*
It display the Wi-Fi mac
address.
§ *#7465625#
To view
status of lock-phone.
§ *#*#3264#*#*
To show RAM
version.
§ *#*#44336#*#*
To display build time
and change list number.
§ *#*#232337#*#
To see or display
device’s Bluetooth address.
§ *#*#197328640#*#*
It enables test mode for service.
§ *#*#8351#*#*
To enable voice
dial mode.
§ *#*#8350#*#*
To disable the
voice dial mode.
§ *#*#0842#*#*
To test
Back-light/vibration.
§ *#*#2664#*#*
To test the
touch-screen.
§ *#*#0289#*#*
For Audio test.
§ *#*#0*#*#*
For LCD
display test.
§ *#*#232331#*#*
To test Bluetooth of any
Android device.
§ *#*#0283#*#*
To perform a
packet loop-back test.
§ *#*#1575#*#*
For advanced GPS
test.
§ *#*#1472365#*#*
To Perform a quick GPS test.
§ *#*#0588#*#*
To perform a
proximity sensor test.
§ *#*#7262626#*#*
To perform field test.
§ *#*#232339#*#*
Testing Wireless LAN.
§ *#9090#
To Diagnose configuration of device.
§ *#872564#
To
control U-S-B logging.
§ *#9900#
System dump mode.
§ *#*#7780#*#*
Reset to
factory state.
§ *2767*3855#
To format
Android device.
§ *#*#4986*2650468#*#*
To get pda, phone, H/W and RF Call Date.
§ *#*#1234#*#*
To know
about pda and firmware version.
§ *#*#1111#*#*
For
FTA Software version.
§ *#*#2222#*#*
For FTA Hardware
version.
§ *#*#7594#*#*
To change
power button behaviour once code enabled.
§ *#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. It shows following 5 menus on screen:
Phone information
Battery information
Battery history
Usage statistics
Wifi information
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
*2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don't try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall camera firmware.
*#*#7594#*#*
This one is my favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.
*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
*#*#8255#*#*
This code can be used to launch GTalk Service Monitor.
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version
NOTE: All above codes have been checked on Google Android phone Samsung Galaxy I7500 only but they should also work in other Google Android phones.
This code can be used to get some interesting information about your phone and battery. It shows following 5 menus on screen:
Phone information
Battery information
Battery history
Usage statistics
Wifi information
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
*2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don't try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall camera firmware.
*#*#7594#*#*
This one is my favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.
*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
*#*#8255#*#*
This code can be used to launch GTalk Service Monitor.
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version
NOTE: All above codes have been checked on Google Android phone Samsung Galaxy I7500 only but they should also work in other Google Android phones.
